Ford KM Tool And Ford VCM OBD For Your Ford Car

Ford KM Tool(CAN BUS) includes 3 parts: OBDII Device, sense dongle, software.
OBDII device: it should connect car and computer.
Sense dongle: it must connect to computer while the software is running.
Software: First choose car type, then you can use Read KM to get the old KM. Also you can use Write KM to change KM in car.

Function
Read KM: Read KM from car
Write KM: Write new KM into car.
About…: The support instrument dash num, device info, newest version, update etc. All info can be get from here.

You must connect to internet for update. First you can find the newest version from the bottom. Then you can get you dongle version and device version with button Device Info. You can update your device and dongle if you find new version. For software you can download from our web site.
Warning: While updating dongle and device, please don’t stop the update process. After update you must reconnect the device. Dongle doesn’t need.

Ford-VCM OBD is diagnostic software for Ford vehicles.
It is designed for ford,mazda,and other few brand cars,really working very well with those cars 1996-2010,some 2011 cars.
Ford-VCM OBD is diagnostic programmer for Ford vehicles 1996-2010. It can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values and perform actuator tests,some key programmer,etc.

Key features:

1.Support for wide range of ECUs and models
2.Easy connection via smart USB to OBD2 interface
3.Wide range of communication protocols and buses covered: 4.J1850 PWM, ISO, CAN
5.Automatic ECU recognition
6.Automatic vehicle scan
7.ECU Identification
8.Fault code (DTC) reading
9.Fault code clearing
10.Measured vaules / live data
11.Live data recording
12.Diagnostic protocol printing
13.Actuator tests
14.Control unit coding
15.PATS Immobilizer operations
16.Flash and serial memory programming

Coverage:

Ford-VCM OBD is able to connect to control units on all Ford vehicles 1996-2010. ECU identification, fault code memory reading and clearing works on all control units. Live data is available on all important ECUs in models such as Mondeo, Focus, Fiesta and other. Actuator tests and coding is available for most demanded control units.

Supported Language:

1.English
2.Germany
3.Czech
4.Hungary:Hungary – Magyar
5.Croatian (hrvatski jezik)

 

Similar posts