Steps for Installing Rechargeable batteries and WIFI Card of MB SD connect compact 4

Steps for Installing Rechargeable batteries and WIFI Card of MB SD connect compact 4

1. Please prepare the following tools:

prepare-tools-1

1— SDconnect multiplexer which need to input the batteries.
2— 6 units Ni-MH Rechargeable batteries, Size:AA, Voltage:1.2V,
Capacity: above 1700mA.
3— 1 unit 108M WIFI Card.
4— Plum screwdriver, Specification: T-20

2.Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.

take-out-sdconnect-c4-screws-2

2.2 Take out the rubber as below.

take-out-sdconnect-c4-rubbers-3

①— Batteries Space.
②— WIFI Card Space. ③— SD Card Space.

3. Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.

take-out-the-screws-of-batteries-space-fixation-4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.

take-out-the-fixation-of-batteries-space-5

3.3 Insert the batteries. Note the Battery polarity.

insert-the-batteries-6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries. input-the-batteries-7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

finish-input-the-batteries-8

4. Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.

insert-the-wifi-card-9

4.2 Push it to make it totally connected.

insert-the-wifi-card-10

4.3 Cover the rubber and fix the screws to finish all the work.

cover-the-rubber-and-fix-the-screws-to-finish-11

Similar posts