The steps are similar among “active function”, “software update” and “firmware update”.
Take “software update” for example.
First please ensure you’ve installed USB driver well, connect the device to PC through USB and plug the test connector to the device. Then power on. Choose the option”PC_LINK”, shown as figures below
Run PC_LINK software on your PC, press “software update”, you’ll see the figures shown as below
You’ll see the process of updating for about 20 minutes, please wait with patience, don’t do anything until you see “Updating software successfully”, shown as figures below
After updating successfully, you could exit directly.
Here is the Data smart3 + Immo.